Led Flat Par Light Manual Pricelist – 200W COB LED waterproof IP65 par light – Beyond
Led Flat Par Light Manual Pricelist – 200W COB LED waterproof IP65 par light – Beyond Detail:
200W COB LED waterproof IP65 par light
- Light source:200W cob led+12x10w RGBW led
- New type high brightness and light output lens
- Use 180°reversed big vision colorful LCD display
- High powrful and good colors
- IP powercon in/out socket
- Dimension: 29*28*21.5cm
- NW:6.5 kgs
- Good to use on stage or architectural lighting
- Cental COB led can do white or RGBW
- Beam angle: 55 degree
Technical Parameters
| Optics | Construction | ||
| Led source | 1pcs 200W white & 4-in-1 rgbw COB led + 12pcs 10W RGBW led | Display | Touch Display |
| Beam angle | COB led 55 degree; RGBW led 25 degree | Data In/Out socket | waterproof DMX in/out socket |
| Power Consumption | 350W | Power Socket | Waterproof Powercon in/out |
| Control | Protection Rating | IP65 | |
| Control Modes | DMX512/Auto Run | Specification | |
| DMX mode | COB White+RGBW :12/8 Channels | Dimension | 282*213*290mm; |
| COB RGBW+RGBW:10/14 Channels | NW | 6.5 kgs | |
| Features | Standard package:carton;Flight case in optional | ||
| Dimmer:0~100% smooth dimming ;two dimmer model in optional( delay or without delay) | Certification：CE,ROHS | ||
LUX Date
Product Effect
Product Test Process
| There are 6 normal steps for QC control process: | |||
| Step 1: all materials passed 100% IQC inspect | |||
| Before send materials to workshop and start to produce, our IQC technicians will inspect them. | |||
| And only the materials are approved to send to workshop if they are qualified. | |||
| All units lights will | |||
| Step 2: at least 48 hours aging test before packing | |||
| All unit lights will be 100% QC inspect and takes around 48- 72 hours aging test | |||
| Step 3: hang testing | |||
| Each batch production we will select certain percent to do hang or rotating test | |||
| Step 4 : Environment high temperature testing | |||
| we did two parts test for high temperature testing : | |||
| A: testing during the product still in R & D | |||
| B: testing for each batch production | |||
| Usually we test the temperature reach to around 45℃ | |||
| Step 5 : vibration test–simulating transit environment | |||
| each batch production we will select certain percent to test to make sure the goods is safe in transport | |||
| Step 6: waterproof testing (only for IP65 lights) | |||
| all waterproof lights we will do waterproof test to see can it be work fine under rain |
Goods Shipping
Product detail pictures:
Related Product Guide:
We have been proud from the higher consumer gratification and wide acceptance due to our persistent pursuit of high quality both on product or service and service for Led Flat Par Light Manual Pricelist – 200W COB LED waterproof IP65 par light – Beyond , The product will supply to all over the world, such as: Tanzania, Luxemburg, Birmingham, If any product meed your demand, remember to feel free to contact us. We're sure your any inquiry or requirement will get prompt attention, high-quality merchandise, preferential prices and cheap freight. Sincerely welcome friends all over the world to call or come to visit, to discuss cooperation for a better future!
By Irene from Greenland - 2017.10.25 15:53
A good manufacturers, we have cooperated twice, good quality and good service attitude.
By Elsie from Mecca - 2017.06.25 12:48
